enable-did

This command configures the Enable DID table, which lets you enable support for Japan NTT 'Modem' DID per FXS port.

Syntax

(config-voip)# gateway analog enable-did <Index> 
(enable-did-<Index>)# 

Command	Description
Index	Defines the FXS port.
did {disable|enable|not-configured}	Enables DID.

Command Mode

Privileged User

Note

■

To view the port-module numbers and port type, enter the display command at the index prompt, for example: (enable-did-0)# display.

■

To enable DID for all FXS ports, use the enable-did command as described in settings.

Example

This example enables Japan DID:

(config-voip)# gateway enable-did 0
(enable-did-0)# did enable
(enable-did-0)# activate